TITATEC / BLOG

← Back to TITATEC Blog

Shelf-Lighting Planning

How to Plan a Gondola Shelf Lighting Upgrade

Real retail snack shelves before and after shelf-lighting installation
Real store project shown before and after shelf-lighting installation.

Adding light to retail shelving does not always require replacing the gondola. A well-planned retrofit starts with the shelf dimensions, the products you want shoppers to see, and a compatible power layout. This guide walks through those decisions and shows how to get an early project estimate before ordering.

What shelf lighting is designed to do

Shelf lighting places light close to the merchandise, helping products remain visible across the display instead of relying only on ceiling lighting. It serves a different purpose from a light box: a light box backlights a graphic or sign, while an under-shelf bar illuminates the merchandise on the shelf below. Some stores use both, but they solve different display needs.

The right layout depends on shelf width, shelf depth, product height, existing fixtures, ambient light and the store’s visual goals. A photo can show a real installation, but it cannot predict the exact light level in every store.

1. Measure the shelving before choosing a kit

Start with one representative gondola bay. Record the usable width of each shelf, how many levels you want to illuminate, and whether the shelving is straight or curved. Check for brackets, price rails, lips and other features that could affect mounting or cable routing.

Use the clear mounting span rather than relying only on the nominal gondola width. A small difference can affect bar fit and the final layout. If the store has more than one shelf type, measure each type separately.

2. Decide which products and levels need light

You may not need to light every level in every aisle. Begin with the areas where product visibility matters most, such as a promotional bay, a darker shelf level or a category with colorful packaging. Consider shelf depth and how far products sit behind the front edge; those details affect how light reaches the merchandise.

TITATEC offers 24V LED shelf-lighting configurations and multiple bar lengths and kit sizes. Match the chosen setup to the measured shelf and the intended number of illuminated levels. Color temperature should suit the product category and surrounding store lighting; review the available product options before specifying a project.

3. Plan the bars, power track and connections together

A shelf-lighting system is a set of compatible components, not just a light bar. Confirm the bar, power track, driver and connectors are intended to work together for the specific configuration. Check where the driver and AC connection will sit, how the track will be positioned, and whether a track run needs a joining connector.

Do not force connectors that do not match. Before installation, compare the connector type with the product instructions and confirm the track length and connection plan. Keep the system unplugged while mounting or adjusting components, and follow the instructions supplied with the kit.

TITATEC gondola shelf lighting installation layout showing the LED light bar, PT19 connectors and TITATEC Power Track
System layout: LED light bar, PT19 connectors and TITATEC Power Track.

4. Estimate the layout and budget before ordering

A store-wide project can involve many shelves and several components per level. An early estimate helps you understand the likely scope before you commit to a full rollout.

Enter the shelf width and the number of illuminated levels to explore a suggested layout and estimated system cost. The estimate is a planning aid based on the information entered; confirm shelf fit, component compatibility, quantities and final pricing before placing an order. The estimator does not replace an on-site lighting measurement or guarantee a specific illumination level.

Try the online lighting estimator →

5. Pilot one section, then review the result

Before planning every aisle, test a representative section. Confirm that the bars fit, connectors seat correctly, cables route cleanly and the light reaches the intended products. Review the display from normal shopper viewing positions and under the store’s usual lighting conditions.

If the test section works for the application, use its confirmed measurements and component list to plan the next areas. A small pilot can reveal shelf or connector differences that a store-wide estimate may not capture.

A real store project

The photos below show a real retail shelf-lighting project before and after installation. They illustrate the appearance of the display in the store; they are not a controlled lighting measurement or a claim of increased sales.

The short video shows illuminated beverage shelving after installation. Use it to inspect the appearance across multiple shelf levels; actual results vary with the shelving, merchandise, ambient light and camera exposure.

Plan your shelf-lighting project

Start with a representative shelf bay, measure the usable span and levels, then use the estimator to explore a suggested layout and budget. If you are unsure about fit or component compatibility, contact TITATEC with shelf photos and measurements before expanding to a full store.

Open the TITATEC lighting estimator →

Contact TITATEC with project questions